Waste Management Safety Training Package

Waste Management Safety Training Package
Description

Product Description

Product Description

Choose any 10 videos valued at $160 DVD or lower in the Waste Management category.

Please copy and paste your choices in the "Order Instructions/Comments" section while ordering.

This section can be found after adding this product to your cart, choosing "check out," and then creating an account and inputting your address information. 
For help please call us at 281-313-0303 / 1-800-334-1523

 

PLEASE CHOOSE 10 VIDEOS FROM THE FOLLOWING LIST:

10001A   WORK STANDARDS AND SAFETY
(English or Spanish) (12 Min.) 
Provides new employees with a serious statement of accepted industry standards on tardiness, absenteeism, safety and general work rules.

10002A   SAFETY ORIENTATION
(English or Spanish) (12 Min.) 
Critical for new employees but effective for experienced workers. Meets OSHA training in the "general hazards to which exposed." Proper clothing, personal protective equipment, fire protection, mechanical and electrical safety, and more.

10004A   BACK INJURY PREVENTION
(English or Spanish) (9 Min.) 
Residential pick-up, maintenance personnel, office employees, drivers, and landfill operators are potential victims of back injuries. This program provides tips on safe lifting and is an excellent way to enhance your "hands-on" training.

10005A   HUMAN BEHAVIOR - REDUCING UNSAFE ACTS
(English) (12 Min.) 
This program defines an unsafe act, accident causes and counseling. Good program for both employees and supervisors. Implementation of this information will reduce accidents significantly.

10006A   FORKLIFT SAFETY
(English or Spanish) (16 Min.) 
This is one of the few forklift training programs that meets OSHA requirements. It explains the engineering principles, safe operating rules, and operator maintenance.

10007A   ACCIDENT REPORTING – SUPERVISOR’S GUIDE
(English) (12 Min.) 
This program explains how to complete injury reports, how to get the most from the report, and the human relations skills involved with employee accident reports.

10008A   JUMP START YOUR BATTERY SAFETY
(English or Spanish) (12 Min.) 
Designed for drivers, shop personnel, and off the job use or handling of batteries. Explains how batteries are constructed, types of batteries, safety, and how to jump start batteries safely.

10009A   HEAT STRESS AWARENESS AND PREVENTION
(English or Spanish) (17 Min.) 
More illnesses are surfacing from employees working in abnormally high temperatures, such as in a hot warehouse or warm assembly environment. This video discusses heat stroke, heat stress, fainting, and precautions to take when working in a hot environment.

10010A   FIRE EXTINGUISHER 2000
(English or Spanish) (13 Min.)  
One of our BEST SELLERS! A fire extinguisher is a simple and effective piece of emergency equipment. This program explains the various classes of fires, different types of fire extinguishers, the key word PASS, and other tips for emergency use of fire extinguishers. 

10011A   SOLID WASTE MANAGEMENT INDUSTRY - ON THE ROAD SAFETY
(English) (12 Min.) 
Great program for the waste hauler. Topics include safe driving formula, four second rule explained and demonstrated, vehicle driver maintenance inspection, railroad crossings, school zones/children, stopping distances, and speed.

10012A   BACKING ACCIDENT PREVENTION
(English or Spanish) (10 Min.) 
Explains the common causes and solution to vehicle backing accidents. Covers using helpers as spotters, backing without spotters, mirrors, zone of non visibility, spotter signals, residential backing, and more.
 
10013A   SOLID WASTE MANAGEMENT INDUSTRY - ROUTE SAFETY  ANALYSIS
(English or Spanish) (14 Min.) 
This video covers route hazards and liability exposures, container hazards, overhead clearances, maneuvering in tight spaces, reporting hazards and damage, overloaded containers, unauthorized hazards, waste container accessibility, landfill driver and helper safety, dumping the load, inspecting the vehicle at landfill, and more.

10014A   DISABLED VEHICLE, ACCIDENT PROCEDURES, AND TRUCK FIRES
(English) (16 Min.) 
What to do with a disabled vehicle, reporting accidents, accident scene procedures, emergency procedures, vehicle fires, and hot loads procedures for handling hazardous waste.

10015A   FRONT END LOADER SAFETY AND OPERATIONS
(English) (10 Min.) 
Basic operating procedures and techniques for front end loaders and helpers. Includes dumping procedures, hoppers, landfill dumping, and general safe operating procedures when using this equipment.

10016A   ROLL OFFS AND SAFETY OPERATIONS
(English) (12 Min.) 
Loading container, cable type hoist, unloading container, dumping container, trapping the container, container spotting, compactor containers, and general safety operating techniques using this equipment.

10017A   SIDE LOADER OPERATIONS AND SAFETY
(English) (5 Min.) 
Operation of the side loader, dumping loads, special hazards, and emphasis on safe lifting. General safety operating techniques using this type of equipment.

10018A   REAR LOADER SAFETY AND OPERATIONS
(English or Spanish) (10 Min.) 
Truck operations, helpers, loading the truck, can sites, improper can sites, container blockages, landfill safety, dumping, and residential safety.

10019A   RESIDENTIAL OPERATIONS
(English or Spanish) (11 Min.) 
Driver safety, vehicle safety, safe driving procedures, riding on vehicles, trash pick-up, personal protection, customer relations, slips and falls, backdoor pick-ups, hazardous wastes, loading, dumping, using equipment, and landfill safety for drivers and helpers.

10020A   DOG BITE PREVENTION
(English) (20 Min.)  
Program directed at mail carriers and meter readers, but also applicable for solid waste employees.

10023A   VEHICLE INSPECTION
(English) (19 Min.) 
Explains the importance of performing an inspection before starting a route, what to look for, and how to best execute a pre-trip inspection.

10024A   CONTROLLING EXPOSURE TO BLOODBORNE PATHOGENS
(English) (27 Min.) 
Developed to meet training requirements for solid waste employees who reasonably anticipate exposure to blood or body fluids on the job. This applies to anyone who is trained in first aid/CPR.

10025A   D.O.T. - OUT OF SERVICE CRITERIA
(English) (18 Min.) 
All new program designed to train service and management personnel, as well as truck drivers, what criteria is used to determine the Department of Transportation criteria for out of service.

10026A   ROUTE SAFETY ANALYSIS
(English) (9 Min.) 
All new program developed for a large trash hauling vehicle, to train vehicle operations in the potential hazards during routine operations. Covers overhead wires, backing up, tight spaces, children and pedestrians. Can be used to train vehicle operators in potential hazards associated with large vehicles.

10027A   SOLID WASTE - LOCKOUT/TAGOUT
(English or Spanish) (16 Min.) 
This new training program is designed for machine operators, personnel who work near machines but do not operate machines, and maintenance personnel. Updated to meet most recent training and regulatory requirements. Explains hazardous energy sources, lock requirements, tag requirements and auditing machinery. Explains requirements for a mandatory written program and training documentation. Video is accompanied with an employee booklet on diskette that can be printed and used as training materials. Also included 20 examination questions and answer key. 

10028A   MULTI-PIECE WHEEL/RIM DEMOUNTING MOUNTING – TRUCK SPLIT RIM
(English) (18 Min.) 
This is an excellent program for employees responsible for mounting and dismounting of truck tires.  This program covers basic safety rules in the work area, dangers of air pressure, use of inflation cages, air hoses with click on chuck and inline gauge, and more.

10029A   CONFINED SPACE ENTRY
(English) (19 Min.) 
Confined spaces are responsible for many deaths every year due to lack of training. This video addresses the risks and operational safety standards for confined spaces commonly found in public works and construction such as testing, ventilation, and rescue procedures. 

10031A   HEARING CONSERVATION
(English) (12 Min.) 
Heightens awareness of hearing conservation in the workplace. Explains the anatomy of the ear, how noise can cause hearing loss, and how to prevent hearing loss.

10032A   ALCOHOLISM IN THE WORKPLACE
(English) (8 Min.) 
This is an awareness only program designed for all employees. Explains signs of alcoholism and recognizing the symptoms.

10033A  WINTER DRIVING SAFETY
(English) (20 Min.) 
This program was developed with a group of international experts. The film covers types of winter driving hazards with footage in real winter conditions around the country. Informs the viewer on recognizing hazards and avoiding accidents. This is an excellent film for those having to drive in winter conditions. Two videos in one.

10035A   HEAT STRESS (Humorous)
(English) (16 Min.) 
More illnesses are surfacing from employees working in abnormally high temperatures, such as in a hot warehouse or warm assembly environment. This video discusses heat stroke, heat stress, fainting, and precautions to take when working in a hot environment.
 
10036A   PERSONAL PROTECTIVE EQUIPMENT
(English) (11 Min.) 
Emphasizes the importance of using personal protection when required. Addresses hard hats, gloves, eye protection, hearing protection, and other aspects of protective equipment.

10037A   RESPIRATORS - THE NEW RULES
(English) (23 Min.) 
This program provides an overview of the new respirator standards. It includes fit testing, maintenance inspection, filtering face pieces, dust masks, and more. This program contains the necessary information you need to comply with this new standard.

10038A   RESPIRATOR SELECTION
(English) (30 Min.) 
The program covers up to date information on the proper procedure for selecting respirators for a particular hazard. Proper fitting procedures are outlined. Explains respirator capabilities and limitations, emergency situations, inspection, seal checks, exposure symptoms, and more.

10039A   FIT TESTING UNDER NEW NIOSH STANDARDS
(English) (17 Min.) 
This program covers the requirements under NIOSH Standards for quantitative and qualitative fit testing procedures. Meet requirements for training employees in proper fit testing procedures.

10040A   HAND INJURIES - GORY STORY
(English) (13 Min.) 
Another motivating training program that uses photographs and video to illustrate dramatically the need for hand safety. Follows an injured person, "Bob," from his injury through surgery and to recovery. Extremely gruesome photos of people who were severely burned from electrical energy, crushing injuries, failure to lockout/tagout, and much more. 

10041A   PORTABLE GRINDERS AND ABRASIVE WHEELS
(English or Spanish) (12 Min.) 
Grinders and abrasive wheels are common and dangerous tools. If improperly used, grinders can explode like hand grenades. This video explains safe use, procedures, and maintenance of grinders and abrasive wheels.

10042A   SAFE USE OF COMPRESSED GAS CYLINDERS
(English) (8 Min.) 
Designed for anyone using compressed gas cylinders. Explains basic safety procedures, compressed gas cylinder hazards, and how to properly use these cylinders.

10043A   SAFE HANDLING OF COMPRESSED GAS CYLINDERS
(English) (10 Min.) 
Explains how to handle cylinders, proper storage, and general safe handling procedures.

10044A   ARC WELDING SAFETY
(English) (11 Min.)   
An excellent review of ARC welding safety, safety hazards, and health hazards associated with this type of welding operation.

10045A   GAS WELDING SAFETY
(English) (16 Min.) 
When using fuel gas welding and cutting, safety is an integral part of any operation. Program explains cylinder connections, valves, "cracking," and basic safety procedures when using fuel gas welding and cutting.

10046A   ELECTRICAL SAFETY RELATED WORK PLACES STANDARD
(English) (11 Min.)   
This program is designed to meet OSHA requirements for training authorized and non authorized personnel in electrical hazards. Mandatory requirements for training employees who not only work with electricity, but those persons who operate electrical equipment. 

10047A   CUTTING TORCH SAFETY
(English) (10 Min.) 
Excellent program to increase safety awareness for anyone using or handling acetylene torches, specifically in cutting operations. Emphasizes valves, pressure gauges, hoses, cylinders, and cutting operation safety.

10048A   LANDFILL SAFETY
(English) (14 Min.) 
This important training program about landfill safety is designed for those employees  who work there on a short term or temporary basis. Programs emphasizes PPE, explains landfill gas hazards, lechate and general safety relating to truck backing, guiding trucks, and general safety relating to landfill operations.

10049A   ROAD RAGE
(English) (16 Min.) 
Aggressive driving, erratic/dangerous behavior on our highways is becoming an everyday occurrence. This short training program is designed to illustrate this behavior and what can be done to prevent people from causing road rage or being a victim of aggressive driving of others. Explains prevention techniques and what to do if you experience hostile or dangerous drivers. Program demonstrates how individuals can change their aggressive behavior. Exam with 20 questions available on diskette.

10050A   THINK N DRIVE
(English) (20 Min.) 
This is an excellent training program for beginners or advanced students. This particular video is unique, in that it shows driving conditions in today's busy, fast-paced environment and illustrates many new applications that are not found in standard DD courses.

10051A   THE CONSEQUENCES OF DRIVING A MOTOR VEHICLE UNDER THE INFLUENCE
(English) (11 Min.) 
Graphically demonstrates the consequences of driving under the influence. Demonstrates a drunk driver being pulled over, given a sobriety field test, taken to jail, and then appearing before a judge for sentencing. Will make people more aware of their driving responsibilities. Portions of this video taped on location with highway patrol officers, police, and judge.

10052A   SAFE DRIVING ON FREEWAYS
(English) (9 Min.) 
This video discusses the dangers and the safety of freeway driving.

10053A  HYPOTHERMIA
(English) (15 Min.) 
Hypothermia can be a serious health problem. This film covers all aspects of prevention and treatment.

10054A   PREVENTING SLIPS AND FALLS IN TRUCKING 
(English) (8 Min.) 
Most injuries in trucking are caused by truck drivers slipping and falling from their vehicles during entry and exit from the vehicle.  This training program was developed to train truckers how to properly enter/exit the vehicle, using the three point triangulation system, in addition to the proper footwear, and other safety basics.  This program, if implemented will greatly reduce accidents and injuries from trucking slips and falls.  Good for all truck drivers, not just 18 wheelers.

10055A  ERGONOMICS - RECYCLING FACILITY SAFETY
(English or Spanish) (15 Min.) 
This video is a wonderful tool for informing new employees of safe work practices. It is also a great refresher for seasoned personnel. It touches on such subjects as personal protective equipment, zero tolerance for drugs and alcohol in and around the workplace, and hazardous materials. This video contains a few seconds of graphic footage some viewers may be uncomfortable viewing.

10056A  COMMERCIAL PICK-UP FRONT-END LOADING AND ROLL-OFFS    
(English or Spanish) (12 Min.) 
Drivers are responsible for the safe and effective operation of the vehicle from the pre-trip inspection before beginning your route, the vehicle operation throughout the day, to the post-trip inspection and route sheets to be turned in at the end of your shift. In this session, we will focus on commercial pick up of solid waste; container pick-up involving front-end loading and roll-offs.  We will address the hazards you can expect to encounter and best practices to avoid and prevent accidents while on the job.

10057A  PRE-TRIP INSPECTION
(English or Spanish) (9 Min.) 
The trucks and equipment you operate are great pieces of equipment. They’re versatile, they’re powerful, and they have to be inspected. That’s right; the equipment you use must be inspected before you use it every time you use it. It’s the law. Thousands of people are injured every year in accidents involving waste hauling vehicles and you don’t want to be one of them. A proper inspection protects you and those working around you by ensuring that the equipment you are using is mechanically safe. And that’s what this video is all about; how to perform a thorough and accurate pre-shift inspection. You should perform the inspection the same way every time to ensure consistency.

1068A Integrating GHS With Hazcom

Integrating GHS with Hazcom (Safety Video) -This update to the Hazard Communication Standard will provide a common and coherent approach to classifying chemicals and communicating hazard information on labels and safety data sheets. Once implemented, the revised standard will improve the quality and consistency of hazard information in the workplace, making it safer for workers. This program covers topics such as Hazard classifications, labels and labeling, SDS, training and information, shipping and receiving, PPE, transitions between the old Hazcom and new GHS standards.

Keywords: GHS, Hazcom, MSDS to SDS, Chemical Labeling, PPE, Chemical Transportation

Shipping/Returns

Shipping and Returns

Our Satisfaction Guarantee Policy

Customer satisfaction is 100% guaranteed. If, for any reason, you feel that any of our DVD's do not meet your expectations, return the product(s) within 14 days and we will provide you with a full refund (less any shipping charges that may have accrued). Returns of stock items will be accepted within 14 days of shipment in their original packages.

To return an item simply fill out our return authorization form and we will contact you within 1-2 business days of receipt with an RA number and ship to address where you can return your item. Please note that All downloadable materials can not be returned.

Trial: In the event you wish to preview one of our DVD programs onsite without going through an order process, please contact us for further approval at 1-800-975-7640.

 

Shipping Terms

All orders typically ship within 24 hrs (Monday thru Friday) via UPS by default. Should you have a request for guaranteed shipment or any other form of expedited shipment please contact our office to ensure proper delivery.

Collect Shipments: If you have your own UPS account number please go to the "View Cart" page. Under the Continue Checkout button should be an area where you can APPLY CODE. In the box please enter the code COLLECTSHIP and hit apply. Continue checkout and once you have reached the UPS screen it should be $0 by default. On the following screen there is an Order comment section. Please let us know your account number and if you wish to expedite shipping.

Waste Management Safety Training Package

Waste Management Safety Training Package
DETAILS
  • SKU: wastemanagementpkg10
  • Runtime: 9 - 30 mins
  • Producer: Atlantic Training

FORMAT COMPARISON

DVD or USB
DVD or USB orders will provide access to printable materials, details upon request.
$1,320.00
Bundle and Save Up To 50%
Click Here For Savings!
VIDEO ON DEMAND
Our streaming video option allows you to directly watch 100s of topics in both English or Spanish languages. Included with each of our videos is the ability to download the various written materials including a leader's guide, tests, wallet cards, attendance logs and more. Also included with our streaming views, is access to our Record-keeping Software and Training Toolbox with 100s of Powerpoints, checklists and toolbox talks.