{"id":42124,"date":"2018-04-30T15:27:36","date_gmt":"2018-04-30T19:27:36","guid":{"rendered":"https:\/\/www.atlantictraining.com\/blog\/?p=42124"},"modified":"2023-03-15T06:56:23","modified_gmt":"2023-03-15T06:56:23","slug":"construction-fall-death-fall-safety","status":"publish","type":"post","link":"https:\/\/www.atlantictraining.com\/blog\/construction-fall-death-fall-safety\/","title":{"rendered":"Construction Fall Death From 10 FT. Highlights Importance of Fall Safety"},"content":{"rendered":"
(VERNON, CT<\/a>)-<\/strong> A 55-year-old woman was working in an apartment complex when she fell through an open hole to the second story just 10 feet below. She landed on concrete and sustained serious injuries. She was taken to a nearby hospital, where she died from the injuries she sustained during the fall. Goodwin was employed through a private contractor that had been hired by a construction company and didn’t see the open hole where the stairs were going to go.<\/p>\n OSHA is currently working with the Vernon Police Department and the building official to actively investigate the accident.<\/p>\n Falls continue to be one of the most prevalent and fatal accidents in construction, dubbed as one of the “Fatal Four”. Construction’s “Fatal Four” are infamously the top four causes of worker death in the construction industry.<\/p>\n The other 3 of the “Fatal Four” are considered to be “struck-by objects”, “electrocutions”, and “caught-in\/between”, with falls being the top cause of death in construction in 2016<\/a> (38.7% of construction fatalities).<\/p>\n That being said, fall protection and adequate fall protection training are not only OSHA mandated, but they’re imperative in potentially saving a worker’s life.<\/p>\n Additionally, proper guarding of holes, edges, etc. are also OSHA mandated to prevent falls.<\/p>\n In order to provide adequate fall prevention, OSHA states<\/a> that employers MUST:<\/p>\n OSHA also mandates<\/a> that employers:<\/p>\n Ironically, Goodwin’s fatal fall comes just weeks before OSHA’s National Safety Stand-down, which is a week dedicated in May that encourages employers to have direct safety talks with employees about safety and safety measures in the workplace; focusing specifically on fall hazards and fall prevention.<\/p>\n The event is completely voluntary, and participation simply involves discussing fall prevention and fall hazards with employees at some point during the week of May 7-11, 2018.<\/p>\n Fall prevention discussions can come in the form of a safety meeting, safety toolbox talks, or any other sort of safety measure such as an equipment inspection, or safety assessment.<\/p>\n “OSHA is partnering with key groups to assist with this effort, including the National Institute for Occupational Safety and Health (NIOSH), the National Occupational Research Agenda (NORA), OSHA approved State Plans, State consultation programs, the Center for Construction Research and Training (CPWR), the American Society of Safety Engineers (ASSE), the National Safety Council, the National Construction Safety Executives (NCSE), the U.S. Air Force, and the OSHA Training Institute (OTI) Education Centers” OSHA mentions<\/a> on their website.<\/p>\n In addition to the Safety Stand-Down, OSHA has an entire website<\/a> dedicated to fall prevention in Construction.<\/p>\n Here they encourage employers to follow these objectives when carrying out their fall prevention program:<\/p>\n Outside of training and planning, fall protection equipment is a very large component of fall safety. These are the requirements for the fall protection equipment that is generally used:<\/p>\nThe Impact of Falls<\/h3>\n
OSHA and Fall Prevention<\/h3>\n
\n
\n
National Safety Stand-Down<\/h3>\n\n
OSHA’s Fall Prevention Campaign<\/h3>\n
\n
\n
\n
\n
\n
Fall Prevention Equipment Requirements<\/h3>\n